Pattern, length, tip finish and plug: specifying sterile single-use bipolar forceps for Australian theatres 🌏
Australian theatres have long relied on reusable bipolar forceps, sent back to the sterilising services department after every list. Single-use bipolar forceps change that routine. They arrive with the cable already attached, are used once and are discarded. For some facilities, especially day-surgery centres and services with limited reprocessing capacity, that is a practical advantage. For procurement, it raises a new set of questions about patterns, cables, plugs, packaging and the Australian supply route.
This guide covers single-use bipolar forceps for Australia. It sets out what Cosil Instruments lists in its single-use range, the details Australian buyers should specify, and how the TGA’s sponsor and ARTG requirements apply when the forceps are made overseas.
Quick answer: Single-use bipolar forceps for Australian supply should be specified by pattern, length, tip finish (standard or non-stick), cable length and generator-side plug. Cosil’s single-use bipolar forceps come with an integrated 3 m cable, are listed as ethylene-oxide sterilised and are made in McPherson, Jeweller, Adson, straight, straight-angled and bayonet patterns, in standard and non-stick versions, with irrigation and suction versions also listed. Before supply in Australia, the device must be included in the ARTG by an Australian sponsor, unless an exemption applies.
Why Australian Facilities Consider Single-Use Bipolar Forceps
Single-use bipolar forceps remove the reprocessing step for an instrument whose fine tips and insulation need careful handling. They also give a predictable, per-case cost and a fresh instrument for every procedure.
The trade-offs are recurring consumable spend and more packaging waste. A facility can use both, with single-use forceps for some lists and reusable sets for others. The choice between them is a clinical and operational decision; procurement’s task is to make sure each is specified and stocked correctly.
Key insight: Single-use forceps change the specification. Because the cable is attached, the generator-side plug becomes part of the product, not a separate accessory.
Cosil’s Single-Use Bipolar Forceps Range
| Version | Patterns listed | Lengths listed (examples) | Notes |
| Standard insulated (blue) | McPherson, Jeweller, Adson, straight, straight angled, bayonet | McPherson 102–115 mm; Jeweller 102–125 mm; Adson 121–180 mm; straight 155–240 mm | Integrated 3 m cable |
| Non-stick (orange) | McPherson, Jeweller, Adson, straight, straight angled, bayonet | Similar ranges to the standard version | Integrated 3 m cable |
| Irrigation, and irrigation with suction (green) | Bayonet, straight and angled | 15.5 cm to 24 cm | Attached cable |
The catalogue lists these forceps as single-use and ethylene-oxide sterilised, with a maximum voltage rating (Umax) of 0.5 kVp, and with several generator-side plug options, including a banana plug fitting. Many references are packed in boxes of 20 units. The colours shown are the catalogue’s identification colours for each version; confirm the colour and labelling of the reference you select.
For a broader overview of this range, see single-use bipolar forceps with integrated cable and the main single-use forceps page.
What Australian Buyers Should Specify
- Pattern: McPherson, Jeweller, Adson, straight, straight angled or bayonet.
- Overall length in millimetres.
- Tip finish: standard insulated or non-stick.
- Irrigation or suction, if needed.
- Generator-side plug: matched to the bipolar output of each generator.
- Cable length: the standard range is listed with a 3 m cable.
- Pack format and quantities.
- Documents required for approval.
If the request is to replace a reusable forceps already in use, record that instrument’s pattern, length and tip too. The single-use version may not be an exact match, and the clinical team should confirm it is acceptable.
The Plug Is Part of the Product
With reusable forceps, a separate bipolar cable links the instrument to the generator. With integrated-cable single-use forceps, the plug at the end of the cable must fit the generator directly.
For each generator in the facility, record:
- the manufacturer and full model name;
- the bipolar socket type, ideally with a photograph;
- the bipolar mode intended;
- the forceps’ voltage rating compared with the generator’s documented output.
Fitting the plug does not by itself show that the forceps suit the generator. Check the generator manufacturer’s accessory information and involve biomedical engineering where your facility requires it. Our electrosurgery equipment compatibility guide and the page on electrosurgery equipment in Australia cover these checks.
Key insight: Hold a separate stock code for each plug option. Two forceps with the same pattern but different plugs are different products.
Sterile Status, Packaging and Storage
Cosil lists its single-use bipolar forceps as ethylene-oxide sterilised. For the reference you select, confirm:
- the sterile barrier packaging and what the label shows;
- the expiry information on the label;
- batch identification for traceability;
- the number of units per box and per carton;
- any storage conditions stated on the label.
Single-use forceps should never be returned to the sterilising services department. Store them separately from reusable instruments, under their own stock codes.
Standard or Non-Stick Single-Use Forceps?
Non-stick versions are often requested where tissue adherence to the tips is a concern. Cosil lists non-stick single-use forceps in the same patterns as the standard range. Because both versions look similar apart from colour, hold them under separate stock codes and check the label at goods-in.
Our page on non-stick bipolar forceps for Australia covers the reusable non-stick range.
The TGA Supply Route
In Australia, medical devices are regulated by the Therapeutic Goods Administration (TGA). For single-use bipolar forceps made overseas:
- Australian sponsor: a medical device must generally be included in the Australian Register of Therapeutic Goods (ARTG) before supply, and the application is made by an Australian sponsor.
- ARTG entry: confirm that the sponsor’s entry covers the exact device, including its single-use status and configuration. ARTG entries can be searched publicly.
- Overseas evidence: the TGA accepts certain evidence from comparable overseas regulators to support an ARTG application, but only for the same device with the same design and intended purpose.
- Labelling and instructions: confirm what will be supplied with the device in Australia.
Cosil does not claim ARTG inclusion on its website, so the sponsor arrangement should be agreed before supply. Distributors often act as sponsor; see our guide for Australian distributors of surgical instruments.
Cosil’s website refers to CE certification with SGS Belgium as notified body, ISO 13485:2016 and EUDAMED registration, and notes that MDR certification is in progress. Request current certificates and check their scope.
Supply Notes for Australian Hospitals and Distributors
Hospitals and day-surgery centres should plan single-use forceps by pattern, length, finish and plug, with reorder levels based on case volume. Because single-use stock is consumed every case, a missed reorder is felt immediately.
Distributors can present the range by version (standard, non-stick, irrigation) and then by pattern, length and plug. Single-use forceps can also be included in procedure packs for Australia. For Cosil’s reusable range in Australia, see bipolar forceps supply for Australia.
Frequently Asked Questions
Does Cosil make single-use bipolar forceps?
Yes. Cosil lists single-use bipolar forceps with an integrated 3 m cable in McPherson, Jeweller, Adson, straight, straight-angled and bayonet patterns, in standard and non-stick versions, plus irrigation and suction versions.
Are Cosil’s single-use bipolar forceps sterile?
The catalogue lists them as ethylene-oxide sterilised. Confirm sterile status, expiry and packaging from the label of the specific reference.
Which plug options are available?
The catalogue lists several generator-side plug options, including a banana plug fitting. Send your generator model and a photo of the bipolar socket to identify the right plug.
Can single-use forceps be supplied directly to an Australian hospital from overseas?
Medical devices generally need ARTG inclusion by an Australian sponsor before supply. Confirm the sponsor and ARTG entry for the exact device before ordering.
How are the forceps packed?
Many references are listed in boxes of 20 units. Confirm pack format and carton quantities for each reference.
Can single-use forceps be reprocessed?
No. Single-use devices are intended for one use only and should not be reprocessed or reused.
A Clear Specification for Every Case
Single-use bipolar forceps simplify theatre routines only when the pattern, finish and plug are right from the first box. Australian buyers who define those details and settle the sponsor and ARTG route early can treat single-use forceps as a routine reorder.
Sourcing single-use bipolar forceps for Australian hospitals or distribution? Contact Cosil Instruments at sales@cosilinstruments.com or +92 331 732 7777, or send your pattern, length and generator details, to request product information and a quotation.

